WhatTypeOfOil.com

2024 Dodge 2500 HD Oil Type & Capacity

The 2024 Dodge 2500 HD oil type depends on the engine: the 6.4L takes 0W-40 (7.0 quarts qt with filter); the 6.7L takes 10W-30 (12.0 quarts qt with filter); the Power Wagon takes 0W-40 (7.0 quarts qt with filter), per the factory service manual.

Factory-spec answer

It depends on the engine:

🛒 Buy 0W-40 Full Synthetic Oil →🛒 Buy 10W-30 Full Synthetic Oil →🔧 2500 HD Oil Filter →

Oil capacity by engine

EngineOil Type (viscosity)Capacity w/ FilterCapacity w/o FilterNotes
6.4L — Big Horn, 2D Pickup, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Big Horn, 2D Pickup, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Big Horn, 4D Pickup Crew Cab, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Big Horn, 4D Pickup Crew Cab, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Laramie, 4D Pickup Crew Cab, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Laramie, 4D Pickup Crew Cab, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Laramie, 4D Pickup Extra Crew Cab, 6.4L Eng VIN J, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Limited Longhorn, 4D Pickup Crew Cab, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Limited Longhorn, 4D Pickup Crew Cab, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Limited Longhorn, 4D Pickup Extra Crew Cab, 6.4L Eng VIN J, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Limited, 4D Pickup Crew Cab, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Limited, 4D Pickup Crew Cab, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Limited, 4D Pickup Extra Crew Cab, 6.4L Eng VIN J, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Lone Star, 2D Pickup, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Lone Star, 2D Pickup, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Lone Star, 4D Pickup Crew Cab, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Lone Star, 4D Pickup Crew Cab, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Rebel, 6.4L Eng VIN J, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Special Service, 2D Pickup, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Special Service, 2D Pickup, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Special Service, 4D Pickup Crew Cab, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Special Service, 4D Pickup Crew Cab, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Tradesman, 2D Pickup, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Tradesman, 2D Pickup, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Tradesman, 4D Pickup Crew Cab, 6.4L Eng VIN J, 4WD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.4L — Tradesman, 4D Pickup Crew Cab, 6.4L Eng VIN J, RWD, 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.
6.7L — Big Horn, 2D Pickup, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Big Horn, 2D Pickup, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Big Horn, 4D Pickup Crew Cab, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Big Horn, 4D Pickup Crew Cab, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Laramie, 4D Pickup Extra Crew Cab, 6.7L Eng VIN L, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Laramie, 4D Pickup Crew Cab, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Limited Longhorn, 4D Pickup Crew Cab, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Laramie, 4D Pickup Crew Cab, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Limited Longhorn, 4D Pickup Crew Cab, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Limited Longhorn, 4D Pickup Extra Crew Cab, 6.7L Eng VIN L, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Limited, 4D Pickup Crew Cab, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Limited, 4D Pickup Crew Cab, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Limited, 4D Pickup Extra Crew Cab, 6.7L Eng VIN L, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Lone Star, 2D Pickup, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Lone Star, 2D Pickup, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Lone Star, 4D Pickup Crew Cab, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Lone Star, 4D Pickup Crew Cab, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Rebel, 6.7L Eng VIN L, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Special Service, 2D Pickup, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Special Service, 2D Pickup, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Special Service, 4D Pickup Crew Cab, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Special Service, 4D Pickup Crew Cab, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Tradesman, 2D Pickup, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Tradesman, 2D Pickup, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Tradesman, 4D Pickup Crew Cab, 6.7L Eng VIN L, 4WD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
6.7L — Tradesman, 4D Pickup Crew Cab, 6.7L Eng VIN L, RWD, 6.7L EngSAE 10W-30 or SAE 5W-40 Synthetic Engine Oil12.00 QTS.—In ambient temperatures above 0°F (-18°C), use 10W-30 engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required. Products meeting Cummins CES 20081 may also be used. The identification of these engine oils is typically located on the back of the oil container. In ambient temperatures below 0°F (-18°C), use 5W-40 synthetic engine oil such as Mopar, Shell Rotella and Shell Rimula that meets FCA Material Standard MS-10902 and the API CK-4 engine oil category is required.
Power Wagon — 6.4L EngAPI Certified, SAE 0W-40 Full Synthetic Engine Oil7.00 QTS.—For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil UltraTM 0W-40 or equivalent MOPAR engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures.

More factory specs & repair guides for your 2500 HD

🛞 2024 Dodge 2500 HD Tire Size & Pressure →🌧️ 2024 Dodge 2500 HD Wiper Blade Sizes →💡 2024 Dodge 2500 HD Light Bulb Sizes →📖 2024 Dodge 2500 HD Factory Service Manual →All fluid capacities (transmission, coolant, brakes)

Powered by factory manual data from our partner network AllOEMManuals.com.

Coolant capacity

16.6 quarts (15.7 L) — MOPAR Antifreeze Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). Meeting the requirements of Chrysler Material Standard MS-12106. Includes: heater and coolant recovery tank filled to "max" level.

Frequently asked questions

What type of oil does a 2024 Dodge 2500 HD take?

It depends on the engine: 6.4L uses 0W-40; 6.7L uses 10W-30; Power Wagon uses 0W-40.

What is the oil capacity of a 2024 Dodge 2500 HD?

Oil capacity depends on the engine: 6.4L holds 7.0 quarts with filter; 6.7L holds 12.0 quarts with filter; Power Wagon holds 7.0 quarts with filter.

How often should I change the oil in my 2024 Dodge 2500 HD?

Most 2024 Dodge 2500 HD owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Dodge recommends intervals based on driving conditions, not just mileage.

Can I use synthetic oil in my 2024 Dodge 2500 HD?

Yes. 0W-40 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2024 Dodge 2500 HD. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.

Other Dodge 2500 HD years

2025 2500 HD2023 2500 HD2022 2500 HD2021 2500 HD2020 2500 HD2019 2500 HD2018 2500 HD2017 2500 HD2016 2500 HD2015 2500 HD2014 2500 HD2013 2500 HD

Other Dodge models

15001500 Classic3500 HD400600AriesAvengerC/VC/V TradesmanCab & ChassisCaliberCaravanChallengerChargerColtColt VistaConquestDakotaDartDaytonaDiplomatDurangoDynastyGrand CaravanHornetIntrepidJourneyLancerMagnumMini Ram VanMiradaMonacoNeonNitroOmniPickupProMaster 1500ProMaster 2500ProMaster 3500ProMaster CityRaiderRam 50Ram VanRam WagonRamchargerRampageShadowSpiritSprinterSRT-4StealthStratusSXViper