1988 Dodge 600 Oil Type & Capacity: 5W-20 (4.0 quarts)
The 1988 Dodge 600 takes 5W-20 motor oil — 4.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-20 — 4.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Base, 2.2 D | API - SAE 5W-20/30/40 (Below 60Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 20W-20 (20Deg.F to 80Deg. F), 20W-40/50/30 (Above 20Deg.F) | 4.00 QTS. | — | — |
| Base, 2.2 E | API - SAE 5W-20/30/40 (Below 60Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 20W-20 (20Deg.F to 80Deg. F), 20W-40/50/30 (Above 20Deg.F) | 4.00 QTS. | — | — |
| Base, 2.5 K | API - SAE 5W-20/30/40 (Below 60Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 20W-20 (20Deg.F to 80Deg. F), 20W-40/50/30 (Above 20Deg.F) | 4.00 QTS. | — | — |
| SE, 2.2 E | API - SAE 5W-20/30/40 (Below 60Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 20W-20 (20Deg.F to 80Deg. F), 20W-40/50/30 (Above 20Deg.F) | 4.00 QTS. | — | — |
| SE, 2.5 K | API - SAE 5W-20/30/40 (Below 60Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 20W-20 (20Deg.F to 80Deg. F), 20W-40/50/30 (Above 20Deg.F) | 4.00 QTS. | — | — |
Complete Oil Change Bundle for 1988 Dodge 600
Everything you need delivered in one order. Pre-matched to your factory spec (5W-20, 4.0 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your 600
🛒 Buy 5W-20 Full Synthetic Oil (4.0 quarts needed) on AmazonPopular Full Synthetic Brands (5W-20):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your 600
🛞 1988 Dodge 600 Tire Size & Pressure →🌧️ 1988 Dodge 600 Wiper Blade Sizes →💡 1988 Dodge 600 Light Bulb Sizes →📖 1988 Dodge 600 Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
9.0 quarts (8.51 L) — 50/50 mixture of water and Ethylene-Glycol Base Antifreeze, such as MOPAR, PRESTON II, PEAK, or antifreeze containing the Alugard 340-2 inhibitor system.
Frequently asked questions
What type of oil does a 1988 Dodge 600 take?
The 1988 Dodge 600 takes 5W-20 motor oil (API - SAE 5W-20/30/40 (Below 60Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 20W-20 (20Deg.F to 80Deg. F), 20W-40/50/30 (Above 20Deg.F)), per the factory service manual.
What is the oil capacity of a 1988 Dodge 600?
The 1988 Dodge 600 oil capacity is 4.0 quarts with a filter change.
How often should I change the oil in my 1988 Dodge 600?
Most 1988 Dodge 600 owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Dodge recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1988 Dodge 600?
Yes. 5W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1988 Dodge 600. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.