2011 Cadillac SRX Oil Type & Capacity: 5W-30 (6.0 quarts)
The 2011 Cadillac SRX takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 2.8 6 — 2.8L Eng | API - SAE 5W-30 | 6.00 QTS. | — | The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. |
| 3.0 Y, AWD — 3.0L Eng | API - SAE 5W-30 | 6.00 QTS. | — | The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. |
| 3.0 Y, FWD — 3.0L Eng | API - SAE 5W-30 | 6.00 QTS. | — | The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. |
More factory specs & repair guides for your SRX
🛞 2011 Cadillac SRX Tire Size & Pressure →🌧️ 2011 Cadillac SRX Wiper Blade Sizes →💡 2011 Cadillac SRX Light Bulb Sizes →📖 2011 Cadillac SRX Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
13.1 quarts (12.39 L) — 50/50 mixture of DEX-COOL and clean drinkable water
Frequently asked questions
What type of oil does a 2011 Cadillac SRX take?
The 2011 Cadillac SRX takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.
What is the oil capacity of a 2011 Cadillac SRX?
The 2011 Cadillac SRX oil capacity is 6.0 quarts with a filter change.
How often should I change the oil in my 2011 Cadillac SRX?
Most 2011 Cadillac SRX owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Cadillac recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2011 Cadillac SRX?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2011 Cadillac SRX. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.