2010 Cadillac SRX Oil Type & Capacity: 5W-30 (6.0 quarts)
The 2010 Cadillac SRX takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 6.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 2.8 4 — 2.8L Eng | API - SAE 5W-30 | 6.00 QTS. | — | This vehicle's engine requires a special oil meeting GM Standard GM4718M. Oils meeting this standard may be identified as synthetic. However, not all synthetic oils will meet this GM standard. Use only an oil that meets GM Standard GM4718M. Substitute Engine Oil: When adding oil to maintain engine oil level, oil meeting GM Standard GM4718M might not be available. You can add substitute oil designated SAE 5W-30 with the starburst symbol at all temperatures. Substitute oil not meeting GM Standard GM4718M should not be used for an oil change. |
| 3.0 Y, AWD — 3.0L Eng | API - SAE 5W-30 | 6.00 QTS. | — | This vehicle's engine requires a special oil meeting GM Standard GM4718M. Oils meeting this standard may be identified as synthetic. However, not all synthetic oils will meet this GM standard. Use only an oil that meets GM Standard GM4718M. Substitute Engine Oil: When adding oil to maintain engine oil level, oil meeting GM Standard GM4718M might not be available. You can add substitute oil designated SAE 5W-30 with the starburst symbol at all temperatures. Substitute oil not meeting GM Standard GM4718M should not be used for an oil change. |
| 3.0 Y, FWD — 3.0L Eng | API - SAE 5W-30 | 6.00 QTS. | — | This vehicle's engine requires a special oil meeting GM Standard GM4718M. Oils meeting this standard may be identified as synthetic. However, not all synthetic oils will meet this GM standard. Use only an oil that meets GM Standard GM4718M. Substitute Engine Oil: When adding oil to maintain engine oil level, oil meeting GM Standard GM4718M might not be available. You can add substitute oil designated SAE 5W-30 with the starburst symbol at all temperatures. Substitute oil not meeting GM Standard GM4718M should not be used for an oil change. |
Complete Oil Change Bundle for 2010 Cadillac SRX
Everything you need delivered in one order. Pre-matched to your factory spec (5W-30, 6.0 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your SRX
🛒 Buy 5W-30 Full Synthetic Oil (6.0 quarts needed) on Amazon💡 Capacity Note: Your 2010 Cadillac SRX holds 6.0 quarts with filter. Since standard jugs are 5 quarts, be sure to pick up extra 1-quart bottles or a 2-pack to reach the full mark on the dipstick.
Popular Full Synthetic Brands (5W-30):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your SRX
🛞 2010 Cadillac SRX Tire Size & Pressure →🌧️ 2010 Cadillac SRX Wiper Blade Sizes →💡 2010 Cadillac SRX Light Bulb Sizes →📖 2010 Cadillac SRX Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
12.6 quarts (11.92 L) — 50/50 mixture of DEX-COOL and clean drinkable water
Frequently asked questions
What type of oil does a 2010 Cadillac SRX take?
The 2010 Cadillac SRX takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.
What is the oil capacity of a 2010 Cadillac SRX?
The 2010 Cadillac SRX oil capacity is 6.0 quarts with a filter change.
How often should I change the oil in my 2010 Cadillac SRX?
Most 2010 Cadillac SRX owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Cadillac recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2010 Cadillac SRX?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 Cadillac SRX. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.