2016 Cadillac ELR Oil Type & Capacity: 5W-30 (3.7 quarts)
The 2016 Cadillac ELR takes 5W-30 motor oil — 3.7 quarts with a filter change, per the factory service manual.
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| ELR | SAE 5W-30 is the best viscosity grade for the vehicle. | 3.70 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. DO NOT use other viscosity grade oils such as SAE 10W-30, 10W-40, or 20W-50. SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F). |
More factory specs & repair guides for your ELR
🛞 2016 Cadillac ELR Tire Size & Pressure →🌧️ 2016 Cadillac ELR Wiper Blade Sizes →💡 2016 Cadillac ELR Light Bulb Sizes →📖 2016 Cadillac ELR Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
7.7 quarts (7.28 L) — 50/50 mixture of DEX-COOL and deionized water.
Frequently asked questions
What type of oil does a 2016 Cadillac ELR take?
The 2016 Cadillac ELR takes 5W-30 motor oil (SAE 5W-30 is the best viscosity grade for the vehicle.), per the factory service manual.
What is the oil capacity of a 2016 Cadillac ELR?
The 2016 Cadillac ELR oil capacity is 3.7 quarts with a filter change.
How often should I change the oil in my 2016 Cadillac ELR?
Most 2016 Cadillac ELR owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Cadillac recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2016 Cadillac ELR?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2016 Cadillac ELR. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.