2010 Dodge Caliber Oil Type & Capacity: 5W-20 (4.5 quarts)
The 2010 Dodge Caliber takes 5W-20 motor oil — 4.5 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-20 — 4.5 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Express — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Heat, Automatic CVT — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Heat, Standard — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Mainstreet — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| R/T, ED3, Automatic CVT — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| R/T, ED3, Standard — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| R/T, EDG — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Rush, ED3, Automatic CVT — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Rush, ED3, Standard — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Rush, EDG, Automatic CVT — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Rush, EDG, Standard — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| SE, Automatic CVT — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| SE, Standard — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| SXT — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Uptown, 2.0 A — 2.0L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Uptown, 2.4 B, ED3 — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
| Uptown, 2.4 B, EDG — 2.4L Eng | API - SAE 5W-20 | 4.50 QTS. | — | — |
Complete Oil Change Bundle for 2010 Dodge Caliber
Everything you need delivered in one order. Pre-matched to your factory spec (5W-20, 4.5 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Caliber
🛒 Buy 5W-20 Full Synthetic Oil (4.5 quarts needed) on AmazonPopular Full Synthetic Brands (5W-20):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Caliber
🛞 2010 Dodge Caliber Tire Size & Pressure →🌧️ 2010 Dodge Caliber Wiper Blade Sizes →💡 2010 Dodge Caliber Light Bulb Sizes →📖 2010 Dodge Caliber Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
7.2 quarts (6.81 L) — MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Includes: heater and coolant recovery tank filled to "max" level.
Frequently asked questions
What type of oil does a 2010 Dodge Caliber take?
The 2010 Dodge Caliber takes 5W-20 motor oil (API - SAE 5W-20), per the factory service manual.
What is the oil capacity of a 2010 Dodge Caliber?
The 2010 Dodge Caliber oil capacity is 4.5 quarts with a filter change.
How often should I change the oil in my 2010 Dodge Caliber?
Most 2010 Dodge Caliber owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Dodge recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2010 Dodge Caliber?
Yes. 5W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 Dodge Caliber. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.