2018 Toyota Land Cruiser Oil Type & Capacity: 0W-20 (7.9 quarts)
The 2018 Toyota Land Cruiser takes 0W-20 motor oil — 7.9 quarts with a filter change, per the factory service manual.
Factory-spec answer
0W-20 — 7.9 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Land Cruiser | TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade oil | 7.90 QTS. | 7.50 QTS. | SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. |
More factory specs & repair guides for your Land Cruiser
🛞 2018 Toyota Land Cruiser Tire Size & Pressure →🌧️ 2018 Toyota Land Cruiser Wiper Blade Sizes →💡 2018 Toyota Land Cruiser Light Bulb Sizes →📖 2018 Toyota Land Cruiser Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
17.1 quarts (16.18 L) — TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology. DO NOT use plain water alone.
Frequently asked questions
What type of oil does a 2018 Toyota Land Cruiser take?
The 2018 Toyota Land Cruiser takes 0W-20 motor oil (TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade oil), per the factory service manual.
What is the oil capacity of a 2018 Toyota Land Cruiser?
The 2018 Toyota Land Cruiser oil capacity is 7.9 quarts with a filter change, or 7.5 quarts without changing the filter.
How often should I change the oil in my 2018 Toyota Land Cruiser?
Most 2018 Toyota Land Cruiser owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Toyota recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2018 Toyota Land Cruiser?
Yes. 0W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2018 Toyota Land Cruiser. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.