2013 Toyota Land Cruiser Oil Type & Capacity
The 2013 Toyota Land Cruiser takes 0W-20 motor oil — 7.9 quarts with a filter change, per the factory service manual.
Factory-spec answer
0W-20 — 7.9 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Land Cruiser | TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade oil | 7.90 QTS. | 7.50 QTS. | SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 is not available, SAE 5W-20 oil may be used. However, it must be replaced with SAE 0W-20 at the next oil change. The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. |
Buy the right oil
Buy 0W-20 motor oil on Amazon2013 Toyota Land Cruiser oil filter on AmazonAs an Amazon Associate we earn from qualifying purchases made through these links.
More specs & repair guides for your Land Cruiser
2013 Toyota Land Cruiser factory service manualAll fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner site AllOEMManuals.com.
Coolant capacity
17.6 quarts (16.65 L) — TOYOTA Super Long Life Coolant or similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrate and non-borate coolant with long-life hybrid organic acid technology. DO NOT use plain water alone.
Frequently asked questions
What type of oil does a 2013 Toyota Land Cruiser take?
The 2013 Toyota Land Cruiser takes 0W-20 motor oil (TOYOTA Genuine Motor Oil. SAE 0W-20 or equivalent ILSAC GF-5 multigrade oil), per the factory service manual.
How much oil does a 2013 Toyota Land Cruiser take?
The 2013 Toyota Land Cruiser holds 7.9 quarts with a filter change, or 7.5 quarts without changing the filter.
Can I use synthetic oil in my 2013 Toyota Land Cruiser?
Yes. 0W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2013 Toyota Land Cruiser. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.