2018 GMC Savana 3500 Oil Type & Capacity: 5W-30 (6.0 quarts)

The 2018 GMC Savana 3500 takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.

Factory-spec answer

5W-30 — 6.0 quarts with filter

🛒 Buy 5W-30 Full Synthetic Oil →🔧 Savana 3500 Oil Filter →

Oil capacity by engine

Engine	Oil Type (viscosity)	Capacity w/ Filter	Capacity w/o Filter	Notes
2.8L — Base, Van Cargo Extended, 2.8L Eng VIN 1, 2.8L Eng	SAE 5W-30 Synthetic Blend Engine Oil	6.00 QTS.	—	Engine oil meeting the dexos2 specification of the proper SAE 5W-30 viscosity grade. ACDelco dexos2 Synthetic Blend is recommended.
2.8L — Base, Van Cargo, 2.8L Eng VIN 1, 2.8L Eng	SAE 5W-30 Synthetic Blend Engine Oil	6.00 QTS.	—	Engine oil meeting the dexos2 specification of the proper SAE 5W-30 viscosity grade. ACDelco dexos2 Synthetic Blend is recommended.
2.8L — LS, Van Passenger Extended, 2.8L Eng VIN 1, 2.8L Eng	SAE 5W-30 Synthetic Blend Engine Oil	6.00 QTS.	—	Engine oil meeting the dexos2 specification of the proper SAE 5W-30 viscosity grade. ACDelco dexos2 Synthetic Blend is recommended.
2.8L — LS, Van Passenger, 2.8L Eng VIN 1, 2.8L Eng	SAE 5W-30 Synthetic Blend Engine Oil	6.00 QTS.	—	Engine oil meeting the dexos2 specification of the proper SAE 5W-30 viscosity grade. ACDelco dexos2 Synthetic Blend is recommended.
2.8L — LT, Van Passenger Extended, 2.8L Eng VIN 1, 2.8L Eng	SAE 5W-30 Synthetic Blend Engine Oil	6.00 QTS.	—	Engine oil meeting the dexos2 specification of the proper SAE 5W-30 viscosity grade. ACDelco dexos2 Synthetic Blend is recommended.
2.8L — LT, Van Passenger, 2.8L Eng VIN 1, 2.8L Eng	SAE 5W-30 Synthetic Blend Engine Oil	6.00 QTS.	—	Engine oil meeting the dexos2 specification of the proper SAE 5W-30 viscosity grade. ACDelco dexos2 Synthetic Blend is recommended.
4.3L — Base, Cutaway, 4.3L Eng VIN P, Gas/Ethanol, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — Base, Cutaway, 4.3L Eng VIN P, Gas, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — Base, Van Cargo Extended, 4.3L Eng VIN P, Gas/Ethanol, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — Base, Van Cargo Extended, 4.3L Eng VIN P, Gas, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — Base, Van Cargo, 4.3L Eng VIN P, Gas, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — Base, Van Cargo, 4.3L Eng VIN P, Gas/Ethanol, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LS, Van Passenger Extended, 4.3L Eng VIN P, Gas, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LS, Van Passenger Extended, 4.3L Eng VIN P, Gas/Ethanol, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LS, Van Passenger, 4.3L Eng VIN P, Gas, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LS, Van Passenger, 4.3L Eng VIN P, Gas/Ethanol, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LT, Van Passenger Extended, 4.3L Eng VIN P, Gas, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LT, Van Passenger Extended, 4.3L Eng VIN P, Gas/Ethanol, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LT, Van Passenger, 4.3L Eng VIN P, Gas, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
4.3L — LT, Van Passenger, 4.3L Eng VIN P, Gas/Ethanol, 4.3L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Cutaway, 6.0L Eng VIN B, Gas/Ethanol/CNG, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Cutaway, 6.0L Eng VIN B, Gas, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Cutaway, 6.0L Eng VIN G, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Van Cargo Extended, 6.0L Eng VIN B, Gas/Ethanol/CNG, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Van Cargo Extended, 6.0L Eng VIN B, Gas/Ethanol, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Van Cargo Extended, 6.0L Eng VIN G, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Van Cargo, 6.0L Eng VIN B, Gas/Ethanol/CNG, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Van Cargo, 6.0L Eng VIN B, Gas/Ethanol, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — Base, Van Cargo, 6.0L Eng VIN G, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LS, Van Passenger Extended, 6.0L Eng VIN B, Gas/Ethanol, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LS, Van Passenger Extended, 6.0L Eng VIN B, Gas/Ethanol/CNG, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LS, Van Passenger Extended, 6.0L Eng VIN G, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LS, Van Passenger, 6.0L Eng VIN B, Gas/Ethanol, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LS, Van Passenger, 6.0L Eng VIN B, Gas/Ethanol/CNG, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LS, Van Passenger, 6.0L Eng VIN G, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LT, Van Passenger Extended, 6.0L Eng VIN B, Gas/Ethanol, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LT, Van Passenger Extended, 6.0L Eng VIN B, Gas/Ethanol/CNG, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LT, Van Passenger Extended, 6.0L Eng VIN G, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LT, Van Passenger, 6.0L Eng VIN B, Gas/Ethanol, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LT, Van Passenger, 6.0L Eng VIN B, Gas/Ethanol/CNG, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
6.0L — LT, Van Passenger, 6.0L Eng VIN G, 6.0L Eng	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	The engine requires engine oil approved to the dexos1 specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 5W-30 is the best viscosity grade for the vehicle. Do not use other viscosity oils such as SAE 10W-30, 10W-40, or 20W-50. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.

More factory specs & repair guides for your Savana 3500

🛞 2018 GMC Savana 3500 Tire Size & Pressure →🌧️ 2018 GMC Savana 3500 Wiper Blade Sizes →💡 2018 GMC Savana 3500 Light Bulb Sizes →📖 2018 GMC Savana 3500 Factory Service Manual →All fluid capacities (transmission, coolant, brakes)

Coolant capacity

14.7 quarts (13.91 L) — 50/50 mixture of DEX-COOL and clean, drinkable water. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Frequently asked questions

What type of oil does a 2018 GMC Savana 3500 take?

The 2018 GMC Savana 3500 takes 5W-30 motor oil (SAE 5W-30 Synthetic Blend Engine Oil), per the factory service manual.

What is the oil capacity of a 2018 GMC Savana 3500?

The 2018 GMC Savana 3500 oil capacity is 6.0 quarts with a filter change.

How often should I change the oil in my 2018 GMC Savana 3500?

Most 2018 GMC Savana 3500 owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — GMC recommends intervals based on driving conditions, not just mileage.

Can I use synthetic oil in my 2018 GMC Savana 3500?

Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2018 GMC Savana 3500. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.

Other GMC Savana 3500 years

2025 Savana 3500 2024 Savana 3500 2023 Savana 3500 2022 Savana 3500 2021 Savana 3500 2020 Savana 3500 2019 Savana 3500 2017 Savana 3500 2016 Savana 3500 2015 Savana 3500 2014 Savana 3500