2016 Cadillac Escalade Oil Type & Capacity
The 2016 Cadillac Escalade takes 0W-20 motor oil — 8.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
0W-20 — 8.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Base, 4WD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Base, 4WD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Base, RWD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Base, RWD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Luxury, 4WD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Luxury, 4WD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Luxury, RWD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Luxury, RWD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Platinum, 4WD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Platinum, 4WD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Platinum, RWD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Platinum, RWD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Premium, 4WD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Premium, 4WD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Premium, RWD, Trans Mfr CD 6L80-E/MYC | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
| Premium, RWD, Trans Mfr CD 8L90/M5U | API - SAE 0W-20 | 8.00 QTS. | — | The engine requires engine oil approved to the dexos specification. Oils meeting this specification can be identified with the dexos certification mark. Look for and use only an engine oil that displays the dexos certification mark of the proper viscosity grade. SAE 0W-20 GM P/N 19259487 (Canadian P/N 19289784) is the best viscosity grade for the 5.3L and 6.2L V8 engines. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos. NOTE: The engine oil capacity has been updated from 8.50 qts to 8.0 qts in reference to GM's Document ID: 3998244, #PIP5231A. |
Buy the right oil
Buy 0W-20 motor oil on Amazon2016 Cadillac Escalade oil filter on AmazonAs an Amazon Associate we earn from qualifying purchases made through these links.
More specs & repair guides for your Escalade
2016 Cadillac Escalade factory service manualAll fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner site AllOEMManuals.com.
Coolant capacity
16.6 quarts (15.7 L) — 50/50 mixture of DEX-COOL and clean, drinkable water. Add 2.1 qts. if equipped with rear heater. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Frequently asked questions
What type of oil does a 2016 Cadillac Escalade take?
The 2016 Cadillac Escalade takes 0W-20 motor oil (API - SAE 0W-20), per the factory service manual.
How much oil does a 2016 Cadillac Escalade take?
The 2016 Cadillac Escalade holds 8.0 quarts with a filter change.
Can I use synthetic oil in my 2016 Cadillac Escalade?
Yes. 0W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2016 Cadillac Escalade. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.
Other Cadillac Escalade years
2025 Escalade2024 Escalade2023 Escalade2022 Escalade2021 Escalade2020 Escalade2019 Escalade2018 Escalade2017 Escalade2015 Escalade2014 Escalade2013 Escalade2012 Escalade2011 Escalade2010 Escalade2009 Escalade2008 Escalade2007 Escalade2006 Escalade2005 Escalade2004 Escalade2003 Escalade2002 Escalade2000 Escalade1999 Escalade