2014 Ford Police Interceptor Utility Oil Type & Capacity: 5W-20 (6.0 quarts)
The 2014 Ford Police Interceptor Utility takes 5W-20 motor oil — 6.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-20 — 6.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 3.5L | MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil | 6.00 QTS. | — | The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system. |
| 3.7L Eng VIN R, Gas/Ethanol | MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil | 6.00 QTS. | — | The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system. |
| 3.7L Eng VIN R, Gas | MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil | 6.00 QTS. | — | The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system. |
More factory specs & repair guides for your Police Interceptor Utility
🛞 2014 Ford Police Interceptor Utility Tire Size & Pressure →🌧️ 2014 Ford Police Interceptor Utility Wiper Blade Sizes →💡 2014 Ford Police Interceptor Utility Light Bulb Sizes →📖 2014 Ford Police Interceptor Utility Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
11.5 quarts (10.88 L) — MOTORCRAFT Orange Antifreeze/Coolant Prediluted. Add the coolant type originally equipped in the vehicle.
Frequently asked questions
What type of oil does a 2014 Ford Police Interceptor Utility take?
The 2014 Ford Police Interceptor Utility takes 5W-20 motor oil (MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil), per the factory service manual.
What is the oil capacity of a 2014 Ford Police Interceptor Utility?
The 2014 Ford Police Interceptor Utility oil capacity is 6.0 quarts with a filter change.
How often should I change the oil in my 2014 Ford Police Interceptor Utility?
Most 2014 Ford Police Interceptor Utility owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Ford recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2014 Ford Police Interceptor Utility?
Yes. 5W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2014 Ford Police Interceptor Utility. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.