2014 Chevrolet Tahoe Oil Type & Capacity

The 2014 Chevrolet Tahoe takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.

Factory-spec answer

5W-30 — 6.0 quarts with filter

Oil capacity by engine

Engine	Oil Type (viscosity)	Capacity w/ Filter	Capacity w/o Filter	Notes
LS, 4WD	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
LS, RWD	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
LT, 4WD	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
LT, RWD	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
LTZ, 4WD	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
LTZ, RWD	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
PPV	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.
SSV	API - SAE 5W-30	6.00 QTS.	—	Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29Deg. C (-20Deg. F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, be sure to always select an oil that meets the required specification, dexos.

Buy the right oil

Buy 5W-30 motor oil on Amazon 2014 Chevrolet Tahoe oil filter on Amazon

As an Amazon Associate we earn from qualifying purchases made through these links.

More specs & repair guides for your Tahoe

2014 Chevrolet Tahoe factory service manual All fluid capacities (transmission, coolant, brakes)

Coolant capacity

18.3 quarts (17.31 L) — 50/50 mixture of DEX-COOL and clean, drinkable water. Add 2.1 qts. if equipped with rear heater. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Frequently asked questions

What type of oil does a 2014 Chevrolet Tahoe take?

The 2014 Chevrolet Tahoe takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.

How much oil does a 2014 Chevrolet Tahoe take?

The 2014 Chevrolet Tahoe holds 6.0 quarts with a filter change.

Can I use synthetic oil in my 2014 Chevrolet Tahoe?

Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2014 Chevrolet Tahoe. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.