2003 Chevrolet Tahoe Oil Type & Capacity: 5W-30 (6.0 quarts)
The 2003 Chevrolet Tahoe takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 6.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 4.8 V, 4WD — 4.8L Eng | API - SAE 5W-30 | 6.00 QTS. | — | — |
| 4.8 V, RWD — 4.8L Eng | API - SAE 5W-30 | 6.00 QTS. | — | — |
| 5.3 T, 4WD — 5.3L Eng | API - SAE 5W-30 | 6.00 QTS. | — | — |
| 5.3 T, RWD — 5.3L Eng | API - SAE 5W-30 | 6.00 QTS. | — | — |
| 5.3 Z, 4WD — 5.3L Eng | API - SAE 5W-30 | 6.00 QTS. | — | — |
| 5.3 Z, RWD — 5.3L Eng | API - SAE 5W-30 | 6.00 QTS. | — | — |
More factory specs & repair guides for your Tahoe
🛞 2003 Chevrolet Tahoe Tire Size & Pressure →🌧️ 2003 Chevrolet Tahoe Wiper Blade Sizes →💡 2003 Chevrolet Tahoe Light Bulb Sizes →📖 2003 Chevrolet Tahoe Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
15.8 quarts (14.95 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Frequently asked questions
What type of oil does a 2003 Chevrolet Tahoe take?
The 2003 Chevrolet Tahoe takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.
What is the oil capacity of a 2003 Chevrolet Tahoe?
The 2003 Chevrolet Tahoe oil capacity is 6.0 quarts with a filter change.
How often should I change the oil in my 2003 Chevrolet Tahoe?
Most 2003 Chevrolet Tahoe owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Chevrolet recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2003 Chevrolet Tahoe?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2003 Chevrolet Tahoe. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.