2010 GMC Yukon Oil Type & Capacity

The 2010 GMC Yukon takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.

Factory-spec answer

5W-30 — 6.0 quarts with filter

Oil capacity by engine

Engine	Oil Type (viscosity)	Capacity w/ Filter	Capacity w/o Filter	Notes
Base, 5.3 0, 4WD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Base, 5.3 0, RWD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Base, 5.3 3	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Denali, AWD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Denali, RWD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Hybrid Denali, 4WD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Hybrid Denali, RWD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Hybrid, 4WD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
Hybrid, RWD	API - SAE 5W-30	6.00 QTS.	5.50 QTS.	Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.

Buy the right oil

Buy 5W-30 motor oil on Amazon 2010 GMC Yukon oil filter on Amazon

As an Amazon Associate we earn from qualifying purchases made through these links.

More specs & repair guides for your Yukon

2010 GMC Yukon factory service manual All fluid capacities (transmission, coolant, brakes)

Coolant capacity

18.3 quarts (17.31 L) — 50/50 mixture of DEX-COOL and clean, drinkable water. Add 2.1 qts. if equipped with rear heater. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Frequently asked questions

What type of oil does a 2010 GMC Yukon take?

The 2010 GMC Yukon takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.

How much oil does a 2010 GMC Yukon take?

The 2010 GMC Yukon holds 6.0 quarts with a filter change, or 5.5 quarts without changing the filter.

Can I use synthetic oil in my 2010 GMC Yukon?

Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 GMC Yukon. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.