2010 Ford Expedition Oil Type & Capacity: 5W-20 (7.0 quarts)
The 2010 Ford Expedition takes 5W-20 motor oil — 7.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-20 — 7.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 4WD | SAE 5W-20 Premium Synthetic Blend Motor Oil | 7.00 QTS. | — | Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. |
| RWD | SAE 5W-20 Premium Synthetic Blend Motor Oil | 7.00 QTS. | — | Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. |
Complete Oil Change Bundle for 2010 Ford Expedition
Everything you need delivered in one order. Pre-matched to your factory spec (5W-20, 7.0 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Expedition
🛒 Buy 5W-20 Full Synthetic Oil (7.0 quarts needed) on Amazon💡 Capacity Note: Your 2010 Ford Expedition holds 7.0 quarts with filter. Since standard jugs are 5 quarts, be sure to pick up extra 1-quart bottles or a 2-pack to reach the full mark on the dipstick.
Popular Full Synthetic Brands (5W-20):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Expedition
🛞 2010 Ford Expedition Tire Size & Pressure →🌧️ 2010 Ford Expedition Wiper Blade Sizes →💡 2010 Ford Expedition Light Bulb Sizes →📖 2010 Ford Expedition Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
19.0 quarts (17.98 L) — MOTORCRAFT Premium Gold Engine Coolant. Add the coolant type originally equipped in the vehicle.
Frequently asked questions
What type of oil does a 2010 Ford Expedition take?
The 2010 Ford Expedition takes 5W-20 motor oil (SAE 5W-20 Premium Synthetic Blend Motor Oil), per the factory service manual.
What is the oil capacity of a 2010 Ford Expedition?
The 2010 Ford Expedition oil capacity is 7.0 quarts with a filter change.
How often should I change the oil in my 2010 Ford Expedition?
Most 2010 Ford Expedition owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Ford recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2010 Ford Expedition?
Yes. 5W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 Ford Expedition. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.