2009 GMC Savana Camper Special Oil Type & Capacity
The 2009 GMC Savana Camper Special oil type depends on the engine: the 4.8 C takes 5W-30 (6.0 quarts qt with filter); the 6.0 K takes 5W-30 (6.0 quarts qt with filter); the 6.6 6 takes 15W-40 (10.0 quarts qt with filter), per the factory service manual.
Factory-spec answer
It depends on the engine:
- 4.8 C: 5W-30, 6.0 quarts with filter
- 6.0 K: 5W-30, 6.0 quarts with filter
- 6.6 6: 15W-40, 10.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 4.8 C — 4.8L Eng | API - SAE 5W-30 | 6.00 QTS. | — | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. |
| 6.0 K — 6.0L Eng | API - SAE 5W-30 | 6.00 QTS. | — | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. |
| 6.6 6 — 6.6L Eng | API - SAE 15W-40 | 10.00 QTS. | 9.20 QTS. | Use ONLY engine oils that have one of these designations: CI-4 or CH-4 for DURAMAX diesel engines. Use SAE 10W-30 if temperatures stay above 0Deg.F (-18Deg.C) before your next oil change. When it is very cold, Below 0Deg.F (-18Deg.C), you should use SAE 5W-30 to improve cold starting and prevent engine damage. DO NOT use other viscosity oils such as SAE 10W-40 or SAE 20W-50. |
Complete Oil Change Bundle for 2009 GMC Savana Camper Special
Everything you need delivered in one order. Pre-matched to your factory spec (5W-30, 6.0 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Savana Camper Special
🛒 Buy 5W-30 Full Synthetic Oil (6.0 quarts needed) on Amazon🛒 Buy 15W-40 Full Synthetic Oil (6.0 quarts needed) on Amazon💡 Capacity Note: Your 2009 GMC Savana Camper Special holds 6.0 quarts with filter. Since standard jugs are 5 quarts, be sure to pick up extra 1-quart bottles or a 2-pack to reach the full mark on the dipstick.
Popular Full Synthetic Brands (5W-30):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Savana Camper Special
🛞 2009 GMC Savana Camper Special Tire Size & Pressure →🌧️ 2009 GMC Savana Camper Special Wiper Blade Sizes →💡 2009 GMC Savana Camper Special Light Bulb Sizes →📖 2009 GMC Savana Camper Special Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
13.4 quarts (12.68 L) — 50/50 mixture of DEX-COOL and clean, drinkable water. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Frequently asked questions
What type of oil does a 2009 GMC Savana Camper Special take?
It depends on the engine: 4.8 C uses 5W-30; 6.0 K uses 5W-30; 6.6 6 uses 15W-40.
What is the oil capacity of a 2009 GMC Savana Camper Special?
Oil capacity depends on the engine: 4.8 C holds 6.0 quarts with filter; 6.0 K holds 6.0 quarts with filter; 6.6 6 holds 10.0 quarts with filter.
How often should I change the oil in my 2009 GMC Savana Camper Special?
Most 2009 GMC Savana Camper Special owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — GMC recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2009 GMC Savana Camper Special?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2009 GMC Savana Camper Special. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.