2000 Chrysler Town & Country Oil Type & Capacity: 5W-30 (5.0 quarts)
The 2000 Chrysler Town & Country takes 5W-30 motor oil — 5.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 5.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Limited, 3.3 G | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| Limited, 3.3 R | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| Limited, 3.8 L, AWD | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| Limited, 3.8 L, FWD | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LX, 3.3 G | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LX, 3.3 R | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LX, 3.8 L, AWD | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LX, 3.8 L, FWD | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LXi, 3.3 G | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LXi, 3.3 R | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LXi, 3.8 L, AWD | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
| LXi, 3.8 L, FWD | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | 4.50 QTS. | — |
More factory specs & repair guides for your Town & Country
🛞 2000 Chrysler Town & Country Tire Size & Pressure →🌧️ 2000 Chrysler Town & Country Wiper Blade Sizes →💡 2000 Chrysler Town & Country Light Bulb Sizes →📖 2000 Chrysler Town & Country Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
13.23 quarts (12.52 L) — 50/50 mixture of Ethylene Glycol Antifreeze and water. Add 2.9 qts. if equipped with rear heater.
Frequently asked questions
What type of oil does a 2000 Chrysler Town & Country take?
The 2000 Chrysler Town & Country takes 5W-30 motor oil (API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F)), per the factory service manual.
What is the oil capacity of a 2000 Chrysler Town & Country?
The 2000 Chrysler Town & Country oil capacity is 5.0 quarts with a filter change, or 4.5 quarts without changing the filter.
How often should I change the oil in my 2000 Chrysler Town & Country?
Most 2000 Chrysler Town & Country owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Chrysler recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2000 Chrysler Town & Country?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2000 Chrysler Town & Country. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.