1990 Chrysler Town & Country Oil Type & Capacity: 5W-30 (4.5 quarts)
The 1990 Chrysler Town & Country takes 5W-30 motor oil — 4.5 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 4.5 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Town & Country | API - SAE 5W-30 | 4.50 QTS. | 4.00 QTS. | — |
Complete Oil Change Bundle for 1990 Chrysler Town & Country
Everything you need delivered in one order. Pre-matched to your factory spec (5W-30, 4.5 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Town & Country
🛒 Buy 5W-30 Full Synthetic Oil (4.5 quarts needed) on AmazonPopular Full Synthetic Brands (5W-30):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Town & Country
🛞 1990 Chrysler Town & Country Tire Size & Pressure →🌧️ 1990 Chrysler Town & Country Wiper Blade Sizes →💡 1990 Chrysler Town & Country Light Bulb Sizes →📖 1990 Chrysler Town & Country Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
8.5 quarts (8.04 L) — PRESTONE II, PEAK, or antifreeze containing the ALUGARD 340-2 inhibitor system. Includes: 1 qt. in the engine coolant recovery tank.
Frequently asked questions
What type of oil does a 1990 Chrysler Town & Country take?
The 1990 Chrysler Town & Country takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.
What is the oil capacity of a 1990 Chrysler Town & Country?
The 1990 Chrysler Town & Country oil capacity is 4.5 quarts with a filter change, or 4.0 quarts without changing the filter.
How often should I change the oil in my 1990 Chrysler Town & Country?
Most 1990 Chrysler Town & Country owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Chrysler recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1990 Chrysler Town & Country?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1990 Chrysler Town & Country. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.