1989 Jeep Wagoneer Oil Type & Capacity: 5W-30 (6.0 quarts)
The 1989 Jeep Wagoneer takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 6.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Wagoneer — 4.0L Eng | API - SAE 5W-30 (-20Deg.F to 60Deg.F), 10W-30/40 (0Deg.F to Above 100Deg.F), 20W-40/50 (30Deg.F to Above 100Deg.F) | 6.00 QTS. | — | — |
More factory specs & repair guides for your Wagoneer
🛞 1989 Jeep Wagoneer Tire Size & Pressure →🌧️ 1989 Jeep Wagoneer Wiper Blade Sizes →💡 1989 Jeep Wagoneer Light Bulb Sizes →📖 1989 Jeep Wagoneer Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
12.0 quarts (11.35 L) — 50/50 mixture of AMC/JEEP/RENAULT All Season Coolant and distilled water. Includes: 2.30 qts. in coolant bottle.
Frequently asked questions
What type of oil does a 1989 Jeep Wagoneer take?
The 1989 Jeep Wagoneer takes 5W-30 motor oil (API - SAE 5W-30 (-20Deg.F to 60Deg.F), 10W-30/40 (0Deg.F to Above 100Deg.F), 20W-40/50 (30Deg.F to Above 100Deg.F)), per the factory service manual.
What is the oil capacity of a 1989 Jeep Wagoneer?
The 1989 Jeep Wagoneer oil capacity is 6.0 quarts with a filter change.
How often should I change the oil in my 1989 Jeep Wagoneer?
Most 1989 Jeep Wagoneer owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Jeep recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1989 Jeep Wagoneer?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1989 Jeep Wagoneer. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.