1988 Jeep Pickup Oil Type & Capacity: 5W-30 (5.0 quarts)
The 1988 Jeep Pickup takes 5W-30 motor oil — 5.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 5.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| J10, Automatic — J10,5.9L Eng | API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) | — | 4.00 QTS. | — |
| J10, Automatic — J10 | API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) | 5.00 QTS. | — | — |
| J10, Standard — J10,5.9L Eng | API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) | — | 4.00 QTS. | — |
| J10, Standard — J10 | API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) | 5.00 QTS. | — | — |
| J20 — J20,5.9L Eng | API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) | — | 4.00 QTS. | — |
| J20 — J20 | API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) | 5.00 QTS. | — | — |
Complete Oil Change Bundle for 1988 Jeep Pickup
Everything you need delivered in one order. Pre-matched to your factory spec (5W-30, 5.0 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Pickup
🛒 Buy 5W-30 Full Synthetic Oil (5.0 quarts needed) on AmazonPopular Full Synthetic Brands (5W-30):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Pickup
🛞 1988 Jeep Pickup Tire Size & Pressure →🌧️ 1988 Jeep Pickup Wiper Blade Sizes →💡 1988 Jeep Pickup Light Bulb Sizes →📖 1988 Jeep Pickup Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
14.0 quarts (13.24 L) — 50/50 mixture of AMC/JEEP/RENAULT All Season Coolant and distilled water
Frequently asked questions
What type of oil does a 1988 Jeep Pickup take?
The 1988 Jeep Pickup takes 5W-30 motor oil (API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F)), per the factory service manual.
What is the oil capacity of a 1988 Jeep Pickup?
The 1988 Jeep Pickup oil capacity is 5.0 quarts with a filter change, or 4.0 quarts without changing the filter.
How often should I change the oil in my 1988 Jeep Pickup?
Most 1988 Jeep Pickup owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Jeep recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1988 Jeep Pickup?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1988 Jeep Pickup. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.