1988 Plymouth Grand Voyager Oil Type & Capacity
The 1988 Plymouth Grand Voyager takes 5W-30 motor oil — 4.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 4.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| LE | SAE 5W-30 (Below 100Deg.F), 10W-30 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 30 (Above 20Deg.F) | 4.00 QTS. | — | — |
| SE, 2.5 K, Automatic | SAE 5W-30 (Below 100Deg.F), 10W-30 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 30 (Above 20Deg.F) | 4.00 QTS. | — | — |
| SE, 2.5 K, Standard | SAE 5W-30 (Below 100Deg.F), 10W-30 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 30 (Above 20Deg.F) | 4.00 QTS. | — | — |
| SE, 3.0 3 | SAE 5W-30 (Below 100Deg.F), 10W-30 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 30 (Above 20Deg.F) | 4.00 QTS. | — | — |
Buy the right oil
Buy 5W-30 motor oil on Amazon1988 Plymouth Grand Voyager oil filter on AmazonAs an Amazon Associate we earn from qualifying purchases made through these links.
More specs & repair guides for your Grand Voyager
1988 Plymouth Grand Voyager factory service manualAll fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner site AllOEMManuals.com.
Coolant capacity
10.0 quarts (9.46 L) — One Pint for the Coolant Reserve Tank. Mopar, Prestone II, Peak, or antifreeze with the Alugard 340-2 inhibitor system
Frequently asked questions
What type of oil does a 1988 Plymouth Grand Voyager take?
The 1988 Plymouth Grand Voyager takes 5W-30 motor oil (SAE 5W-30 (Below 100Deg.F), 10W-30 (Above 0Deg.F), 15W-40 (Above 10Deg. F), 30 (Above 20Deg.F)), per the factory service manual.
How much oil does a 1988 Plymouth Grand Voyager take?
The 1988 Plymouth Grand Voyager holds 4.0 quarts with a filter change.
Can I use synthetic oil in my 1988 Plymouth Grand Voyager?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1988 Plymouth Grand Voyager. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.