1985 Nissan Pulsar NX Oil Type & Capacity: 10W-30 (3.5 quarts)
The 1985 Nissan Pulsar NX takes 10W-30 motor oil — 3.5 quarts with a filter change, per the factory service manual.
Factory-spec answer
10W-30 — 3.5 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Automatic | SAE 10W-30 | 3.50 QTS. | 3.10 QTS. | — |
| Standard | SAE 10W-30 | 3.50 QTS. | 3.10 QTS. | — |
More factory specs & repair guides for your Pulsar NX
🛞 1985 Nissan Pulsar NX Tire Size & Pressure →🌧️ 1985 Nissan Pulsar NX Wiper Blade Sizes →💡 1985 Nissan Pulsar NX Light Bulb Sizes →📖 1985 Nissan Pulsar NX Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
5.6 quarts (5.29 L) — 50/50 mixture of Ethylene Glycol Base Antifreeze and water
Frequently asked questions
What type of oil does a 1985 Nissan Pulsar NX take?
The 1985 Nissan Pulsar NX takes 10W-30 motor oil (SAE 10W-30), per the factory service manual.
What is the oil capacity of a 1985 Nissan Pulsar NX?
The 1985 Nissan Pulsar NX oil capacity is 3.5 quarts with a filter change, or 3.1 quarts without changing the filter.
How often should I change the oil in my 1985 Nissan Pulsar NX?
Most 1985 Nissan Pulsar NX owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Nissan recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1985 Nissan Pulsar NX?
Yes. 10W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1985 Nissan Pulsar NX. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.