1983 Nissan Pulsar Oil Type & Capacity: 5W-30 (3.9 quarts)
The 1983 Nissan Pulsar takes 5W-30 motor oil — 3.9 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 3.9 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Automatic — 1.6L Eng | SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 or 10W-40, (Preferred) (0Deg.F to Above 100Deg.F), 20W-40 or 20W-50 (20Deg.F to Above 100Deg.F) | 3.90 QTS. | — | — |
| Standard — 1.6L Eng | SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 or 10W-40, (Preferred) (0Deg.F to Above 100Deg.F), 20W-40 or 20W-50 (20Deg.F to Above 100Deg.F) | 3.90 QTS. | — | — |
More factory specs & repair guides for your Pulsar
🛞 1983 Nissan Pulsar Tire Size & Pressure →🌧️ 1983 Nissan Pulsar Wiper Blade Sizes →💡 1983 Nissan Pulsar Light Bulb Sizes →📖 1983 Nissan Pulsar Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Frequently asked questions
What type of oil does a 1983 Nissan Pulsar take?
The 1983 Nissan Pulsar takes 5W-30 motor oil (SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 or 10W-40, (Preferred) (0Deg.F to Above 100Deg.F), 20W-40 or 20W-50 (20Deg.F to Above 100Deg.F)), per the factory service manual.
What is the oil capacity of a 1983 Nissan Pulsar?
The 1983 Nissan Pulsar oil capacity is 3.9 quarts with a filter change.
How often should I change the oil in my 1983 Nissan Pulsar?
Most 1983 Nissan Pulsar owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Nissan recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1983 Nissan Pulsar?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1983 Nissan Pulsar. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.