2020 Volvo XC40 Oil Type & Capacity: 5W-30 (5.9 quarts)
The 2020 Volvo XC40 takes 5W-30 motor oil — 5.9 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 5.9 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| T4 Inscription | Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 | 5.90 QTS. | — | 4-cylinder engines only: Volvo oil VCC RBS0-2AE/SAE 0W20 is recommended for extreme driving conditions. This oil must never be used in 5- or 6-cylinder engines. |
| T4 Momentum | Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 | 5.90 QTS. | — | 4-cylinder engines only: Volvo oil VCC RBS0-2AE/SAE 0W20 is recommended for extreme driving conditions. This oil must never be used in 5- or 6-cylinder engines. |
| T4 R-Design | Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 | 5.90 QTS. | — | 4-cylinder engines only: Volvo oil VCC RBS0-2AE/SAE 0W20 is recommended for extreme driving conditions. This oil must never be used in 5- or 6-cylinder engines. |
| T5 Inscription | Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 | 5.90 QTS. | — | 4-cylinder engines only: Volvo oil VCC RBS0-2AE/SAE 0W20 is recommended for extreme driving conditions. This oil must never be used in 5- or 6-cylinder engines. |
| T5 Momentum | Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 | 5.90 QTS. | — | 4-cylinder engines only: Volvo oil VCC RBS0-2AE/SAE 0W20 is recommended for extreme driving conditions. This oil must never be used in 5- or 6-cylinder engines. |
| T5 R-Design | Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30 | 5.90 QTS. | — | 4-cylinder engines only: Volvo oil VCC RBS0-2AE/SAE 0W20 is recommended for extreme driving conditions. This oil must never be used in 5- or 6-cylinder engines. |
Complete Oil Change Bundle for 2020 Volvo XC40
Everything you need delivered in one order. Pre-matched to your factory spec (5W-30, 5.9 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your XC40
🛒 Buy 5W-30 Full Synthetic Oil (5.9 quarts needed) on Amazon💡 Capacity Note: Your 2020 Volvo XC40 holds 5.9 quarts with filter. Since standard jugs are 5 quarts, be sure to pick up extra 1-quart bottles or a 2-pack to reach the full mark on the dipstick.
Popular Full Synthetic Brands (5W-30):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your XC40
🛞 2020 Volvo XC40 Tire Size & Pressure →🌧️ 2020 Volvo XC40 Wiper Blade Sizes →💡 2020 Volvo XC40 Light Bulb Sizes →📖 2020 Volvo XC40 Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
N/A (N/A) — 50/50 mixture of VOLVO Antifreeze/Coolant or equivalent coolant with corrosion inhibitor and water. The level should not exceed the yellow MAX mark inside the expansion tank.
Frequently asked questions
What type of oil does a 2020 Volvo XC40 take?
The 2020 Volvo XC40 takes 5W-30 motor oil (Full Synthetic engine oil meeting the minimum ACEA A5/B5 must be used, SAE 5W-30), per the factory service manual.
What is the oil capacity of a 2020 Volvo XC40?
The 2020 Volvo XC40 oil capacity is 5.9 quarts with a filter change.
How often should I change the oil in my 2020 Volvo XC40?
Most 2020 Volvo XC40 owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Volvo recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2020 Volvo XC40?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2020 Volvo XC40. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.