2020 Mazda 3 Oil Type & Capacity: 0W-20 (4.8 quarts)
The 2020 Mazda 3 takes 0W-20 motor oil — 4.8 quarts with a filter change, per the factory service manual.
Factory-spec answer
0W-20 — 4.8 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 2.5L — Select, 2.5L Eng VIN M | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| 2.5L — Preferred, 4D Sedan, 2.5L Eng VIN M | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| 2.5L — Select, 2.5L Eng VIN L | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| 2.5L — Preferred, 4D Sedan, 2.5L Eng VIN L | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Base, 4D Hatchback, AWD | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Base, 4D Hatchback, FWD | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Base, 4D Sedan | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Preferred, 4D Hatchback, AWD | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Preferred, 4D Hatchback, FWD | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Premium, 4D Hatchback, AWD | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Premium, 4D Hatchback, FWD, Automatic Trans | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Premium, 4D Hatchback, FWD, Standard Trans | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Premium, 4D Sedan, AWD | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
| Premium, 4D Sedan, FWD | API - ILSAC GF-V or higher SAE 0W-20 Engine Oil | 4.80 QTS. | 4.50 QTS. | — |
Complete Oil Change Bundle for 2020 Mazda 3
Everything you need delivered in one order. Pre-matched to your factory spec (0W-20, 4.8 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your 3
🛒 Buy 0W-20 Full Synthetic Oil (4.8 quarts needed) on AmazonPopular Full Synthetic Brands (0W-20):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your 3
🛞 2020 Mazda 3 Tire Size & Pressure →🌧️ 2020 Mazda 3 Wiper Blade Sizes →💡 2020 Mazda 3 Light Bulb Sizes →📖 2020 Mazda 3 Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
7.0 quarts (6.62 L). Check the vehicle identification number on the vehicle identify cation number plate. Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant.
Frequently asked questions
What type of oil does a 2020 Mazda 3 take?
The 2020 Mazda 3 takes 0W-20 motor oil (API - ILSAC GF-V or higher SAE 0W-20 Engine Oil), per the factory service manual.
What is the oil capacity of a 2020 Mazda 3?
The 2020 Mazda 3 oil capacity is 4.8 quarts with a filter change, or 4.5 quarts without changing the filter.
How often should I change the oil in my 2020 Mazda 3?
Most 2020 Mazda 3 owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Mazda recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2020 Mazda 3?
Yes. 0W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2020 Mazda 3. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.