2019 Audi S4 Oil Type & Capacity
The 2019 Audi S4 takes 0W-20 motor oil — 7.7 quarts with a filter change, per the factory service manual.
Factory-spec answer
0W-20 — 7.7 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Premium | Castrol EDGE Professional SAE 0W-20 Long Life IV. VW 508 00, VW 509 00 | 7.70 QTS. | — | Refer to Technical Bulletin 2010043 for engine oils meeting the required Audi oil quality standards. Part numbers are for reference only. Approximate capacity. |
| Premium Plus | Castrol EDGE Professional SAE 0W-20 Long Life IV. VW 508 00, VW 509 00 | 7.70 QTS. | — | Refer to Technical Bulletin 2010043 for engine oils meeting the required Audi oil quality standards. Part numbers are for reference only. Approximate capacity. |
| Prestige | Castrol EDGE Professional SAE 0W-20 Long Life IV. VW 508 00, VW 509 00 | 7.70 QTS. | — | Refer to Technical Bulletin 2010043 for engine oils meeting the required Audi oil quality standards. Part numbers are for reference only. Approximate capacity. |
Buy the right oil
Buy 0W-20 motor oil on Amazon2019 Audi S4 oil filter on AmazonAs an Amazon Associate we earn from qualifying purchases made through these links.
More specs & repair guides for your S4
2019 Audi S4 factory service manualAll fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner site AllOEMManuals.com.
Coolant capacity
10.5 quarts (9.93 L) — G13 TL-VW774J. Dilute with distilled water.
Frequently asked questions
What type of oil does a 2019 Audi S4 take?
The 2019 Audi S4 takes 0W-20 motor oil (Castrol EDGE Professional SAE 0W-20 Long Life IV. VW 508 00, VW 509 00), per the factory service manual.
How much oil does a 2019 Audi S4 take?
The 2019 Audi S4 holds 7.7 quarts with a filter change.
Can I use synthetic oil in my 2019 Audi S4?
Yes. 0W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2019 Audi S4. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.