2012 Chevrolet Impala Oil Type & Capacity: 5W-30 (6.0 quarts)
The 2012 Chevrolet Impala takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 6.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| LS, Gas | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
| LS, Gas/Ethanol | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
| LT, Gas | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
| LT, Gas/Ethanol | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
| LTZ, Gas | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
| LTZ, Gas/Ethanol | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
| Police, Gas | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
| Police, Gas/Ethanol | API - SAE 5W-30 | 6.00 QTS. | — | Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. |
Complete Oil Change Bundle for 2012 Chevrolet Impala
Everything you need delivered in one order. Pre-matched to your factory spec (5W-30, 6.0 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Impala
🛒 Buy 5W-30 Full Synthetic Oil (6.0 quarts needed) on Amazon💡 Capacity Note: Your 2012 Chevrolet Impala holds 6.0 quarts with filter. Since standard jugs are 5 quarts, be sure to pick up extra 1-quart bottles or a 2-pack to reach the full mark on the dipstick.
Popular Full Synthetic Brands (5W-30):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Impala
🛞 2012 Chevrolet Impala Tire Size & Pressure →🌧️ 2012 Chevrolet Impala Wiper Blade Sizes →💡 2012 Chevrolet Impala Light Bulb Sizes →📖 2012 Chevrolet Impala Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
10.1 quarts (9.55 L) — 50/50 mixture of DEX-COOL and clean, drinkable water. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Frequently asked questions
What type of oil does a 2012 Chevrolet Impala take?
The 2012 Chevrolet Impala takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.
What is the oil capacity of a 2012 Chevrolet Impala?
The 2012 Chevrolet Impala oil capacity is 6.0 quarts with a filter change.
How often should I change the oil in my 2012 Chevrolet Impala?
Most 2012 Chevrolet Impala owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Chevrolet recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2012 Chevrolet Impala?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2012 Chevrolet Impala. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.