2010 Toyota FJ Cruiser Oil Type & Capacity: 0W-20 (6.4 quarts)
The 2010 Toyota FJ Cruiser takes 0W-20 motor oil — 6.4 quarts with a filter change, per the factory service manual.
Factory-spec answer
0W-20 — 6.4 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 4WD, Automatic | ILSAC multigrade engine oil SAE 0W-20 | 6.40 QTS. | 6.00 QTS. | If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change. |
| 4WD, Part Time | ILSAC multigrade engine oil SAE 0W-20 | 6.40 QTS. | 6.00 QTS. | If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change. |
| RWD | ILSAC multigrade engine oil SAE 0W-20 | 6.40 QTS. | 6.00 QTS. | If SAE 0W-20 is not available, SAE 5W-20 may be used. However, it must be replaced with SAE 0W-20 at the next oil change. |
More factory specs & repair guides for your FJ Cruiser
🛞 2010 Toyota FJ Cruiser Tire Size & Pressure →🌧️ 2010 Toyota FJ Cruiser Wiper Blade Sizes →💡 2010 Toyota FJ Cruiser Light Bulb Sizes →📖 2010 Toyota FJ Cruiser Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
9.9 quarts (9.36 L) — TOYOTA Super Long Life Coolant or equivalent. DO NOT use plain water alone.
Frequently asked questions
What type of oil does a 2010 Toyota FJ Cruiser take?
The 2010 Toyota FJ Cruiser takes 0W-20 motor oil (ILSAC multigrade engine oil SAE 0W-20), per the factory service manual.
What is the oil capacity of a 2010 Toyota FJ Cruiser?
The 2010 Toyota FJ Cruiser oil capacity is 6.4 quarts with a filter change, or 6.0 quarts without changing the filter.
How often should I change the oil in my 2010 Toyota FJ Cruiser?
Most 2010 Toyota FJ Cruiser owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Toyota recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2010 Toyota FJ Cruiser?
Yes. 0W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 Toyota FJ Cruiser. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.