2010 Toyota Avalon Oil Type & Capacity
The 2010 Toyota Avalon takes 5W-30 motor oil — 6.4 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 6.4 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Limited | SAE 5W-30 | 6.40 QTS. | 6.00 QTS. | SAE 5W-30 is the best choice for good fuel economy and good starting in cold weather. If SAE 5W-30 is not available, SAE 10W-30 oil may be used. However, it should be replaced with SAE 5W-30 at the next oil change. |
| XL | SAE 5W-30 | 6.40 QTS. | 6.00 QTS. | SAE 5W-30 is the best choice for good fuel economy and good starting in cold weather. If SAE 5W-30 is not available, SAE 10W-30 oil may be used. However, it should be replaced with SAE 5W-30 at the next oil change. |
| XLS | SAE 5W-30 | 6.40 QTS. | 6.00 QTS. | SAE 5W-30 is the best choice for good fuel economy and good starting in cold weather. If SAE 5W-30 is not available, SAE 10W-30 oil may be used. However, it should be replaced with SAE 5W-30 at the next oil change. |
Buy the right oil
Buy 5W-30 motor oil on Amazon2010 Toyota Avalon oil filter on AmazonAs an Amazon Associate we earn from qualifying purchases made through these links.
More specs & repair guides for your Avalon
2010 Toyota Avalon factory service manualAll fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner site AllOEMManuals.com.
Coolant capacity
8.8 quarts (8.32 L) — TOYOTA Super Long Life Coolant or equivalent. DO NOT use plain water alone.
Frequently asked questions
What type of oil does a 2010 Toyota Avalon take?
The 2010 Toyota Avalon takes 5W-30 motor oil (SAE 5W-30), per the factory service manual.
How much oil does a 2010 Toyota Avalon take?
The 2010 Toyota Avalon holds 6.4 quarts with a filter change, or 6.0 quarts without changing the filter.
Can I use synthetic oil in my 2010 Toyota Avalon?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 Toyota Avalon. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.