2010 Toyota 4Runner Oil Type & Capacity
The 2010 Toyota 4Runner oil type depends on the engine: the Limited, AWD takes 0W-20 (6.6 quarts qt with filter); the Limited, RWD takes 0W-20 (6.6 quarts qt with filter); the SR5, 2.7 X takes 0W-20 (6.1 quarts qt with filter); the SR5, 4.0 U, 4WD takes 0W-20 (6.6 quarts qt with filter); the SR5, 4.0 U, RWD takes 0W-20 (6.6 quarts qt with filter); the Trail takes 0W-20 (6.6 quarts qt with filter), per the factory service manual.
Factory-spec answer
It depends on the engine:
- Limited, AWD: 0W-20, 6.6 quarts with filter
- Limited, RWD: 0W-20, 6.6 quarts with filter
- SR5, 2.7 X: 0W-20, 6.1 quarts with filter
- SR5, 4.0 U, 4WD: 0W-20, 6.6 quarts with filter
- SR5, 4.0 U, RWD: 0W-20, 6.6 quarts with filter
- Trail: 0W-20, 6.6 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Limited, AWD — 4.0L Eng | SAE 0W-20 Synthetic Oil | 6.60 QTS. | 6.00 QTS. | — |
| Limited, RWD — 4.0L Eng | SAE 0W-20 Synthetic Oil | 6.60 QTS. | 6.00 QTS. | — |
| SR5, 2.7 X — 2.7L Eng | SAE 0W-20 Synthetic Oil | 6.10 QTS. | 5.40 QTS. | — |
| SR5, 4.0 U, 4WD — 4.0L Eng | SAE 0W-20 Synthetic Oil | 6.60 QTS. | 6.00 QTS. | — |
| SR5, 4.0 U, RWD — 4.0L Eng | SAE 0W-20 Synthetic Oil | 6.60 QTS. | 6.00 QTS. | — |
| Trail — 4.0L Eng | SAE 0W-20 Synthetic Oil | 6.60 QTS. | 6.00 QTS. | — |
More factory specs & repair guides for your 4Runner
🛞 2010 Toyota 4Runner Tire Size & Pressure →🌧️ 2010 Toyota 4Runner Wiper Blade Sizes →💡 2010 Toyota 4Runner Light Bulb Sizes →📖 2010 Toyota 4Runner Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
11.1 quarts (10.5 L) — TOYOTA Super Long Life Coolant or equivalent. DO NOT use plain water alone.
Frequently asked questions
What type of oil does a 2010 Toyota 4Runner take?
It depends on the engine: Limited, AWD uses 0W-20; Limited, RWD uses 0W-20; SR5, 2.7 X uses 0W-20; SR5, 4.0 U, 4WD uses 0W-20; SR5, 4.0 U, RWD uses 0W-20; Trail uses 0W-20.
What is the oil capacity of a 2010 Toyota 4Runner?
Oil capacity depends on the engine: Limited, AWD holds 6.6 quarts with filter; Limited, RWD holds 6.6 quarts with filter; SR5, 2.7 X holds 6.1 quarts with filter; SR5, 4.0 U, 4WD holds 6.6 quarts with filter; SR5, 4.0 U, RWD holds 6.6 quarts with filter; Trail holds 6.6 quarts with filter.
How often should I change the oil in my 2010 Toyota 4Runner?
Most 2010 Toyota 4Runner owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Toyota recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2010 Toyota 4Runner?
Yes. 0W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 Toyota 4Runner. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.