2010 Chevrolet Suburban Oil Type & Capacity: 5W-30 (6.0 quarts)
The 2010 Chevrolet Suburban takes 5W-30 motor oil — 6.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 6.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| C1500 | API - SAE 5W-30 | 6.00 QTS. | — | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. |
| C2500 | API - SAE 5W-30 | 6.00 QTS. | — | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. |
| K1500 | API - SAE 5W-30 | 6.00 QTS. | — | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. |
| K2500 | API - SAE 5W-30 | 6.00 QTS. | — | Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. |
Complete Oil Change Bundle for 2010 Chevrolet Suburban
Everything you need delivered in one order. Pre-matched to your factory spec (5W-30, 6.0 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Suburban
🛒 Buy 5W-30 Full Synthetic Oil (6.0 quarts needed) on Amazon💡 Capacity Note: Your 2010 Chevrolet Suburban holds 6.0 quarts with filter. Since standard jugs are 5 quarts, be sure to pick up extra 1-quart bottles or a 2-pack to reach the full mark on the dipstick.
Popular Full Synthetic Brands (5W-30):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Suburban
🛞 2010 Chevrolet Suburban Tire Size & Pressure →🌧️ 2010 Chevrolet Suburban Wiper Blade Sizes →💡 2010 Chevrolet Suburban Light Bulb Sizes →📖 2010 Chevrolet Suburban Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
18.3 quarts (17.31 L) — 50/50 mixture of DEX-COOL and clean, drinkable water. Add 2.1 qts. if equipped with rear heater. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Frequently asked questions
What type of oil does a 2010 Chevrolet Suburban take?
The 2010 Chevrolet Suburban takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.
What is the oil capacity of a 2010 Chevrolet Suburban?
The 2010 Chevrolet Suburban oil capacity is 6.0 quarts with a filter change.
How often should I change the oil in my 2010 Chevrolet Suburban?
Most 2010 Chevrolet Suburban owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Chevrolet recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2010 Chevrolet Suburban?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2010 Chevrolet Suburban. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.