2003 Chrysler Concorde Oil Type & Capacity: 5W-30 (5.0 quarts)
The 2003 Chrysler Concorde takes 5W-30 motor oil — 5.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 5.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Limited | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | — | — |
| LX | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | — | — |
| LXi | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | 5.00 QTS. | — | — |
More factory specs & repair guides for your Concorde
🛞 2003 Chrysler Concorde Tire Size & Pressure →🌧️ 2003 Chrysler Concorde Wiper Blade Sizes →💡 2003 Chrysler Concorde Light Bulb Sizes →📖 2003 Chrysler Concorde Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
11.0 quarts (10.4 L) — 50/50 mixture of Ethylene Glycol Antifreeze and water. Includes: heater and coolant recovery tank filled to "max" level.
Frequently asked questions
What type of oil does a 2003 Chrysler Concorde take?
The 2003 Chrysler Concorde takes 5W-30 motor oil (API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F)), per the factory service manual.
What is the oil capacity of a 2003 Chrysler Concorde?
The 2003 Chrysler Concorde oil capacity is 5.0 quarts with a filter change.
How often should I change the oil in my 2003 Chrysler Concorde?
Most 2003 Chrysler Concorde owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Chrysler recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2003 Chrysler Concorde?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2003 Chrysler Concorde. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.