2001 Chevrolet RV Cutaway Oil Type & Capacity
The 2001 Chevrolet RV Cutaway oil type depends on the engine: the 5.7 R, L31 takes 5W-30 (5.0 quarts qt with filter); the 5.7 R, L31/KL8 takes 5W-30 (5.0 quarts qt with filter); the 6.5 F takes 15W-40 (8.0 quarts qt with filter); the 8.1 G takes 5W-30 (6.5 quarts qt with filter), per the factory service manual.
Factory-spec answer
It depends on the engine:
- 5.7 R, L31: 5W-30, 5.0 quarts with filter
- 5.7 R, L31/KL8: 5W-30, 5.0 quarts with filter
- 6.5 F: 15W-40, 8.0 quarts with filter
- 8.1 G: 5W-30, 6.5 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 5.7 R, L31 — 5.7L Eng | API - SAE 5W-30 | 5.00 QTS. | — | SAE 5W-30 is best for your vehicle. However, use 10W-30 if the outside temperature is higher than 18Deg.C (0Deg.F). Do not use other viscosity oils, such as SAE 20W-50. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures. |
| 5.7 R, L31/KL8 — 5.7L Eng | API - SAE 5W-30 | 5.00 QTS. | — | SAE 5W-30 is best for your vehicle. However, use 10W-30 if the outside temperature is higher than 18Deg.C (0Deg.F). Do not use other viscosity oils, such as SAE 20W-50. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures. |
| 6.5 F — 6.5L Eng | API - CH-4/CG-4, SAE 15W-40 | 8.00 QTS. | — | SAE 15W-40 is best for your vehicle. However, you can use SAE 10W-30 if it's going to be colder than (0°C) 32°F before your next oil change. When it's very cold, below (-18°C) 0°F, you should use SAE 10W-30 to improve cold starting. SAE 30 may be used at temperatures above freezing, (0°C) 32°F. These numbers on the oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 10W-40 or SAE 20W-50. |
| 8.1 G — 8.1L Eng | API - SAE 5W-30 | 6.50 QTS. | — | SAE 5W-30 is best for your vehicle. However, use 10W-30 if the outside temperature is higher than 18Deg.C (0Deg.F). Do not use other viscosity oils, such as SAE 20W-50. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures. |
More factory specs & repair guides for your RV Cutaway
🛞 2001 Chevrolet RV Cutaway Tire Size & Pressure →🌧️ 2001 Chevrolet RV Cutaway Wiper Blade Sizes →💡 2001 Chevrolet RV Cutaway Light Bulb Sizes →📖 2001 Chevrolet RV Cutaway Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
17.0 quarts (16.08 L) — 50/50 mixture of DEX-COOL and clean, drinkable water
Frequently asked questions
What type of oil does a 2001 Chevrolet RV Cutaway take?
It depends on the engine: 5.7 R, L31 uses 5W-30; 5.7 R, L31/KL8 uses 5W-30; 6.5 F uses 15W-40; 8.1 G uses 5W-30.
What is the oil capacity of a 2001 Chevrolet RV Cutaway?
Oil capacity depends on the engine: 5.7 R, L31 holds 5.0 quarts with filter; 5.7 R, L31/KL8 holds 5.0 quarts with filter; 6.5 F holds 8.0 quarts with filter; 8.1 G holds 6.5 quarts with filter.
How often should I change the oil in my 2001 Chevrolet RV Cutaway?
Most 2001 Chevrolet RV Cutaway owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Chevrolet recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2001 Chevrolet RV Cutaway?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2001 Chevrolet RV Cutaway. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.