2000 Subaru Outback Oil Type & Capacity: 5W-30 (4.7 quarts)
The 2000 Subaru Outback takes 5W-30 motor oil — 4.7 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 4.7 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Base, Automatic | API - SAE 5W-30 | 4.70 QTS. | — | — |
| Base, Standard | API - SAE 5W-30 | 4.70 QTS. | — | — |
| Limited, 4D Sedan, Automatic | API - SAE 5W-30 | 4.70 QTS. | — | — |
| Limited, 4D Sedan, Standard | API - SAE 5W-30 | 4.70 QTS. | — | — |
| Limited, 4D Wagon, Automatic | API - SAE 5W-30 | 4.70 QTS. | — | — |
| Limited, 4D Wagon, Standard | API - SAE 5W-30 | 4.70 QTS. | — | — |
More factory specs & repair guides for your Outback
🛞 2000 Subaru Outback Tire Size & Pressure →🌧️ 2000 Subaru Outback Wiper Blade Sizes →💡 2000 Subaru Outback Light Bulb Sizes →📖 2000 Subaru Outback Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
7.1 quarts (6.71 L) — SUBARU Coolant or equivalent: a 50/50 mixture of Ethylene-Glycol Coolant and soft water
Frequently asked questions
What type of oil does a 2000 Subaru Outback take?
The 2000 Subaru Outback takes 5W-30 motor oil (API - SAE 5W-30), per the factory service manual.
What is the oil capacity of a 2000 Subaru Outback?
The 2000 Subaru Outback oil capacity is 4.7 quarts with a filter change.
How often should I change the oil in my 2000 Subaru Outback?
Most 2000 Subaru Outback owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Subaru recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 2000 Subaru Outback?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 2000 Subaru Outback. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.