1997 Mazda B2300 Oil Type & Capacity
The 1997 Mazda B2300 takes 5W-30 motor oil — 5.0 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 5.0 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Base, Automatic | API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F) | 5.00 QTS. | 4.00 QTS. | — |
| Base, Standard | API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F) | 5.00 QTS. | 4.00 QTS. | — |
| SE, 2D Pickup Extra Cab | API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F) | 5.00 QTS. | 4.00 QTS. | — |
| SE, 2D Pickup, Automatic | API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F) | 5.00 QTS. | 4.00 QTS. | — |
| SE, 2D Pickup, Standard | API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F) | 5.00 QTS. | 4.00 QTS. | — |
Buy the right oil
Buy 5W-30 motor oil on Amazon1997 Mazda B2300 oil filter on AmazonAs an Amazon Associate we earn from qualifying purchases made through these links.
More specs & repair guides for your B2300
1997 Mazda B2300 factory service manualAll fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner site AllOEMManuals.com.
Coolant capacity
7.2 quarts (6.81 L) — 50/50 mixture of Coolant and water
Frequently asked questions
What type of oil does a 1997 Mazda B2300 take?
The 1997 Mazda B2300 takes 5W-30 motor oil (API - SAE 5W-30 (Below -20Deg.F to 35Deg.F), 10W-30 (Below -10Deg.F to Above 120Deg.F)), per the factory service manual.
How much oil does a 1997 Mazda B2300 take?
The 1997 Mazda B2300 holds 5.0 quarts with a filter change, or 4.0 quarts without changing the filter.
Can I use synthetic oil in my 1997 Mazda B2300?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1997 Mazda B2300. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.