1995 Toyota MR2 Oil Type & Capacity: 10W-30 (4.1 quarts)
The 1995 Toyota MR2 takes 10W-30 motor oil — 4.1 quarts with a filter change, per the factory service manual.
Factory-spec answer
10W-30 — 4.1 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 2.0 S — 2.0L Eng | SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) | 4.10 QTS. | 3.80 QTS. | — |
| 2.2 S, Automatic — 2.2L Eng | SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) | 4.10 QTS. | 3.90 QTS. | — |
| 2.2 S, Standard — 2.2L Eng | SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F) | 4.10 QTS. | 3.90 QTS. | — |
More factory specs & repair guides for your MR2
🛞 1995 Toyota MR2 Tire Size & Pressure →🌧️ 1995 Toyota MR2 Wiper Blade Sizes →💡 1995 Toyota MR2 Light Bulb Sizes →📖 1995 Toyota MR2 Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
14.4 quarts (13.62 L) — 50/50 mixture of Ethylene Glycol Antifreeze and water. DO NOT use alcohol type antifreeze or plain water alone.
Frequently asked questions
What type of oil does a 1995 Toyota MR2 take?
The 1995 Toyota MR2 takes 10W-30 motor oil (SAE 10W-30 (Above 0Deg.F), 5W-30 (Below 50Deg.F)), per the factory service manual.
What is the oil capacity of a 1995 Toyota MR2?
The 1995 Toyota MR2 oil capacity is 4.1 quarts with a filter change, or 3.8 quarts without changing the filter.
How often should I change the oil in my 1995 Toyota MR2?
Most 1995 Toyota MR2 owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Toyota recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1995 Toyota MR2?
Yes. 10W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1995 Toyota MR2. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.