1989 Toyota Cressida Oil Type & Capacity: 5W-30 (4.7 quarts)
The 1989 Toyota Cressida takes 5W-30 motor oil — 4.7 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 4.7 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Cressida — 3.0L Eng | SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 or 20W-40/50 (Above 10Deg.F) | 4.70 QTS. | 4.30 QTS. | — |
More factory specs & repair guides for your Cressida
🛞 1989 Toyota Cressida Tire Size & Pressure →🌧️ 1989 Toyota Cressida Wiper Blade Sizes →💡 1989 Toyota Cressida Light Bulb Sizes →📖 1989 Toyota Cressida Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
8.8 quarts (8.32 L) — Ethylene glycol coolant (Do not use alcohol type)
Frequently asked questions
What type of oil does a 1989 Toyota Cressida take?
The 1989 Toyota Cressida takes 5W-30 motor oil (SAE 5W-30 (Below 50Deg.F), 10W-30/40/50 (Above 0Deg.F), 15W-40 or 20W-40/50 (Above 10Deg.F)), per the factory service manual.
What is the oil capacity of a 1989 Toyota Cressida?
The 1989 Toyota Cressida oil capacity is 4.7 quarts with a filter change, or 4.3 quarts without changing the filter.
How often should I change the oil in my 1989 Toyota Cressida?
Most 1989 Toyota Cressida owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Toyota recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1989 Toyota Cressida?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1989 Toyota Cressida. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.