1988 Merkur Scorpio Oil Type & Capacity: 5W-30 (N/A)

The 1988 Merkur Scorpio takes 5W-30 motor oil — N/A with a filter change, per the factory service manual.

Factory-spec answer

5W-30 — N/A with filter

Oil capacity by engine

EngineOil Type (viscosity)Capacity w/ FilterCapacity w/o FilterNotes
Automatic — 2.9L EngSAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F)N/A——
Standard — 2.9L EngSAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F)N/A——

More factory specs & repair guides for your Scorpio

🛞 1988 Merkur Scorpio Tire Size & Pressure →🌧️ 1988 Merkur Scorpio Wiper Blade Sizes →💡 1988 Merkur Scorpio Light Bulb Sizes →📖 1988 Merkur Scorpio Factory Service Manual →All fluid capacities (transmission, coolant, brakes)

Powered by factory manual data from our partner network AllOEMManuals.com.

Frequently asked questions

What type of oil does a 1988 Merkur Scorpio take?

The 1988 Merkur Scorpio takes 5W-30 motor oil (SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F)), per the factory service manual.

What is the oil capacity of a 1988 Merkur Scorpio?

The 1988 Merkur Scorpio oil capacity is N/A with a filter change.

How often should I change the oil in my 1988 Merkur Scorpio?

Most 1988 Merkur Scorpio owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Merkur recommends intervals based on driving conditions, not just mileage.

Can I use synthetic oil in my 1988 Merkur Scorpio?

Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1988 Merkur Scorpio. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.

Other Merkur Scorpio years

1989 Scorpio

Other Merkur models

XR4Ti