1988 Isuzu Impulse Oil Type & Capacity
The 1988 Isuzu Impulse takes 5W-30 motor oil — 3.8 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-30 — 3.8 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| 2.3 L, Automatic — 2.3L Eng | SAE 5W-30 (Below 15Deg.F to Above 100Deg.F), 10W-30 (Below -13Deg.F to Above 100Deg.F), 15W-40, 20W-40/50 (Below 105Deg.F) | — | 3.40 QTS. | — |
| 2.3 L, Standard — 2.3L Eng | SAE 5W-30 (Below 15Deg.F to Above 100Deg.F), 10W-30 (Below -13Deg.F to Above 100Deg.F), 15W-40, 20W-40/50 (Below 105Deg.F) | — | 3.40 QTS. | — |
Buy the right oil
Buy 5W-30 motor oil on Amazon1988 Isuzu Impulse oil filter on AmazonAs an Amazon Associate we earn from qualifying purchases made through these links.
More specs & repair guides for your Impulse
1988 Isuzu Impulse factory service manualAll fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner site AllOEMManuals.com.
Coolant capacity
9.2 quarts (8.7 L) — 50/50 mixture of good quality ethylene-glycol antifreeze & water.
Frequently asked questions
What type of oil does a 1988 Isuzu Impulse take?
The 1988 Isuzu Impulse takes 5W-30 motor oil (SAE 5W-30 (Below 15Deg.F to Above 100Deg.F), 10W-30 (Below -13Deg.F to Above 100Deg.F), 15W-40, 20W-40/50 (Below 105Deg.F)), per the factory service manual.
How much oil does a 1988 Isuzu Impulse take?
The 1988 Isuzu Impulse holds 3.8 quarts with a filter change, or 3.4 quarts without changing the filter.
Can I use synthetic oil in my 1988 Isuzu Impulse?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1988 Isuzu Impulse. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.