1986 Merkur XR4Ti Oil Type & Capacity: 5W-30 (N/A)
The 1986 Merkur XR4Ti takes 5W-30 motor oil — N/A with a filter change, per the factory service manual.
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| Automatic — 2.3L Eng | SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | N/A | — | — |
| Standard — 2.3L Eng | SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | N/A | — | — |
More factory specs & repair guides for your XR4Ti
🛞 1986 Merkur XR4Ti Tire Size & Pressure →🌧️ 1986 Merkur XR4Ti Wiper Blade Sizes →💡 1986 Merkur XR4Ti Light Bulb Sizes →📖 1986 Merkur XR4Ti Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Frequently asked questions
What type of oil does a 1986 Merkur XR4Ti take?
The 1986 Merkur XR4Ti takes 5W-30 motor oil (SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F)), per the factory service manual.
What is the oil capacity of a 1986 Merkur XR4Ti?
The 1986 Merkur XR4Ti oil capacity is N/A with a filter change.
How often should I change the oil in my 1986 Merkur XR4Ti?
Most 1986 Merkur XR4Ti owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Merkur recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1986 Merkur XR4Ti?
Yes. 5W-30 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1986 Merkur XR4Ti. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.