1986 Acura Integra Oil Type & Capacity: 5W-20 (4.2 quarts)
The 1986 Acura Integra takes 5W-20 motor oil — 4.2 quarts with a filter change, per the factory service manual.
Factory-spec answer
5W-20 — 4.2 quarts with filter
Oil capacity by engine
| Engine | Oil Type (viscosity) | Capacity w/ Filter | Capacity w/o Filter | Notes |
|---|---|---|---|---|
| LS, 2D Hatchback, Automatic | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
| LS, 2D Hatchback, Standard | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
| LS, 4D Hatchback, Automatic | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
| LS, 4D Hatchback, Standard | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
| RS, 2D Hatchback, Automatic | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
| RS, 2D Hatchback, Standard | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
| RS, 4D Hatchback, Automatic | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
| RS, 4D Hatchback, Standard | API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above) | 4.20 QTS. | 3.70 QTS. | — |
Complete Oil Change Bundle for 1986 Acura Integra
Everything you need delivered in one order. Pre-matched to your factory spec (5W-20, 4.2 quarts).
As an Amazon Associate we earn from qualifying purchases. Prices shown are real-time retail estimates.
Buy the right oil & filter for your Integra
🛒 Buy 5W-20 Full Synthetic Oil (4.2 quarts needed) on AmazonPopular Full Synthetic Brands (5W-20):
As an Amazon Associate we earn from qualifying purchases made through these links.
More factory specs & repair guides for your Integra
🛞 1986 Acura Integra Tire Size & Pressure →🌧️ 1986 Acura Integra Wiper Blade Sizes →💡 1986 Acura Integra Light Bulb Sizes →📖 1986 Acura Integra Factory Service Manual →All fluid capacities (transmission, coolant, brakes)Powered by factory manual data from our partner network AllOEMManuals.com.
Coolant capacity
4.8 quarts (4.54 L) — 50/50 mixture of HONDA Antifreeze/Coolant and water
Frequently asked questions
What type of oil does a 1986 Acura Integra take?
The 1986 Acura Integra takes 5W-20 motor oil (API - SAE 5W-20 (-10Deg.F & Below), 5W-30 (32Deg.F & Below), 10W-30 (-5Deg.F to 90Deg.F), 10W-40 (-5Deg.F and Above)), per the factory service manual.
What is the oil capacity of a 1986 Acura Integra?
The 1986 Acura Integra oil capacity is 4.2 quarts with a filter change, or 3.7 quarts without changing the filter.
How often should I change the oil in my 1986 Acura Integra?
Most 1986 Acura Integra owners follow a 5,000–7,500 mile interval with conventional oil, or up to 10,000 miles with full synthetic. Always check the oil life monitor if equipped, and consult your owner's manual — Acura recommends intervals based on driving conditions, not just mileage.
Can I use synthetic oil in my 1986 Acura Integra?
Yes. 5W-20 is widely available as a full synthetic, and synthetic is safe (often recommended) for the 1986 Acura Integra. What matters most is matching the factory viscosity and specification, then changing the oil and filter on schedule.